MicroGraphic Solutions

Questions ?

Need to Place an Order ?

Call Toll Free 888-785-2383

Exposes Your Raw Duplication Film
Specifically designed to replace the B&H 404 and the Microbra M-1 (and its many OEM versions, such as Kodak, NB, etc.)  Cooler operation due to the use of a

400 watt lamp

Lamp: 400watt - as used in the Xidex/
Anacomp/CMI 16-D/16-V roll film duplicators
Exposure Rate: 200-400 per hour
Warm-up Time: 3 minutes
Electrical: 110v -60hz- 6amp
230v – 50hz – 3 amp
Dimensions: 12-1/2” H x 21 W x 16-1/2” D
(320mm x 530mm x 420mm)
Net Weight : 62 lbs ~ Shipping Weight : 80 lbs
Light Weight - Quieter Operation with

Low Power Consumption
Designed with Handles for Easy Relocation.  Reliable and Rugged with a Sturdy Frame
Easier to Maintain - Faster in Throughput with Nominal Transit of a Master Duplicate

of 5-6 seconds
Note:Actual Unit Operation Speed is Dependant on the Type and Quality of the Film, Density
of the Master, and Dexterity of the Operator.

MicroFiche Duplicating Systems

Exposure and Developer Units

These Are "NEW" Units with Full Manufacturer Warranty

$8,699.00

Specifications

The V-I Microfilm Duplicator represents a leap forward in state-of-the-art technology in micorfiche duplication technique. It employs a tight registration pressure pad which anchors onto a spring-loaded glass to maintain total intimacy of contact between master and duplicating film. As a result both exhibit the same sharpness, resolution, and detail. 

 
The exposing area has a radiused glass which, with columnated light rays from the U.V. source lamp, provides optimum resolution. After the operator selects a time sequence  a PRINT switch is actuated, the shutter opens and exposes the duplicate film to the desired  amount of light for perfect exposure.

Exposes two microfiche at one time Exposes both diazo and esicular film Superior resolution for each actuation Accomondates ALL flat microfilms  Compact, rugged, and economical Minimal  maintainance  User Friendly and Simple to operate

$5,599.00

Master & Copy Format Standard : 4" X 6" - Egineering Aperature Cards : 3-1/4" X 7-3/8"

Copy Film Diazo, Dry Diazo, Vesicular  ~ Approx. Speed :  Diazo: 275 Copies/Hour (12-15 seconds each)
Vesicular: 350 Copies/Hour (6 seconds each) ~ Exposure Range Variable 1-60 seconds
Light Source 800 Watt mercury lamp (1500 hours life)  ~ Warm-Up Time 4 minutes
Electrical Requirements 115V, 12 amps, 60 Hz ~ Optional : 230V, 6 amps, 50Hz and 60 Hz : $200.00
Heat Dissipation 4670 BTU/Hour `~ Dimensions H: 13-1/2 " x W: 21" x D: 12"  - Wt: 80 lbs

CV-11 $ 1,699.00                                                   CV-18 $ 2,399.00

CV-18 (Includes Automatic Metering Pump)

CV Micobra Microfiche Developer Unit

Specifications

The new CV Microfiche Developers are upgraded replacements for the original Microbra Developers. This great brand has been sold for over 25 years with an excellent track record of durability and ease of use. There are Two Models Available: The CV-11 and CV-18. The CV-11 Offers an 11 inch Wide Throat and A Manual Metering Pump. The CV-18 Offers A Larger Capacity 18 inch Throat with an Automatic Metering Pump.  The CV-18 with the "auto-metering amonia pump" eliminates the need for the user to decant and manually pump ammonia. Both models offer simple operation. The CV line has been designed to be easy to operate and less costly to mai ntain. All components are interchangeable with spare parts from the older units. EyeCom has been and will continue to be a supplier of spare parts for all Microbra units. These models are designed to meet strict European CE Standards.