MicroGraphic Solutions
~ 
~ 
~ 
~ 
~ 
~ 
~ 
~ 
~ 
~ 
~ 
~ 
~ 
An affordable solution for scanning any well log stored on microfilm.
The ScanPro-35 is easy to use.
You can scan an entire well log that has been stored
on 16mm roll film, cartridge film or microfiche.
The scan can be viewed, compared
and analyzed on your PC monitor.
Store to your hard drive, burn to a CD-ROM or
print on your laser printer.
Includes Dual Lens Assembly
Your Choice of One Non-Rotational Lens and Your Choice of One Full Image Rotation Lens
~ (See Available Sizes Below) ~
INCLUDED IN THE BOX
Base Scanner Unit
~ Standard Aperture Card & MicroFiche Carrier
Dual Lens Assembly with Choice of One Non-Rotation Lens and Choice of One Image Rotation Lens
Auto Image Assembler Software and Document Management Software for indexing and editing your film scans.
Industry standard TWAIN interface
USB Connector Cable and Manuals
Using the ScanPro-35 to Scan Well Logs
and Strip Charts to your PC
The "ScanPro-35" is a low cost scanner for
scanning well logs, strip charts, and large sized images
(engineering drawings,
plot maps, newspapers, etc.) that are stored on microfilm.
The ScanPro35 makes
it possible to scan these images in segments and the Auto ImageAssembler software,
included in the purchase,
automatically combines the individual scans into a single
seamless image.
You simply follow the step-by-step instructions right on your
computer monitor to scan as many
segments of the Well Log image as you want and
the included Auto ImageAssembler software
automatically assembles them into a
final seamless image on your computer.
~ 
Engineering Size Images Stored on Microfilm
The most common film formats
for storing engineering size images and newspapers on microfilm are
aperture
cards and 35mm roll film. This example shows a large image that is too BIG to fit
on the VIEW SCREEN
and will require two scans to cover the entire microfilm image.
The Auto ImageAssembler software will automatically combine those scans into
a single final image.
Using the ScanPro 35 to Scan Microfilm Images Too Large to Fit on the Scanner
Viewing Screen.
If you have large size images on your microfilm, they
may not fit on the view screen making it
necessary to move the film carrier to
see the entire image.
With the ScanPro35 you can scan these separate views and
have the Auto ImageAssembler Software
automatically put them together into a
seamless single image. The step-by-step instructions are shown
on your PC monitor,
making it easy and convenient to scan microfilm.
~ Locate the LEFT side of the image on VIEW SCREEN and Scan
~ 
~ Locate the RIGHT side of the image on VIEW SCREEN and Scan
~ 
~ Auto ImageAssembler Software Combines the TWO Scans Providing A Finished Single
Scan
Examples of large film images are engineering drawings, architectural drawings
and newspapers.
The unique "Auto ImageAssembler Software" is the secret
that makes it possible to scan
images that are larger than will fit on the scanner
VIEW SCREEN. Most film sizes can be
scanned in two scans and the "Auto ImageAssembler
Sofyware" produces a seamless final scan.
SIMPLE TO SET UP and USE
You install the Auto ImageAssembler Software on
the PC that is connected to
your ScanPro-35 scanner (Click for
Minimum PC Requirements) and follow the
screen message prompts to complete
a scan. Your final scan can then be saved, e-mailed
networked, faxed or printed
to large paper to provide a convenient working copy.
Microfilm ScanPro35 : MINIMUM REQUIREMENTS
500 Mz Pentium, or AMD 1GHz
Pentium, or AMDr
Windows 98SE, 2000, XP
40GB HD
256MB Memory
VGA/SVGA/XSVGA
Screen Resolution set to 800x600dpi
CD ROM reader
The minimum recommended requirements
should be followed to insure proper performance
The Microfilm ScanPro35 utilizes
the Auto ImageAssembler software to combine the individual scans into a single seamless
scan.
This software puts considerable demands on your computer system and the
overall performance of Auto ImageAssembly will depend
on the computer speed and
amount of available memory. The minimum requirements should be followed to insure
proper performance.
Dual Lens Assembly with Your Choice of One Non-Rotation lens, and One Non-Rotation Lens
Available Lens Sizes:
.... Non-Rotational Lens Sizes : 19x, 24x, 31.5x, 36x, 42x, 48x -or- 54x : Additional Lenses $169.00)
.....Full Rotation Lens Sizes : 19x, 24x, 31.5x, 36x, 42x, -or- 48x : Additional Lenses $239.00)
M100 : Manual COMBO MicroFiche & 16/35mm OpenSpool RollFilm Winder : $ 695.00
M200 : Motorized COMBO MicroFiche & 16/35mm OpenSpool Roll Film Winder : $ 1,975.00
MC1635 : Motorized 16/35mm Open Spool RollFilm Winder : $1,595.00
Illumination Lamp : $ 29.00
International Electric Wiring : 230V, 50/60Hz : $ 49.00
Base Unit Ground Shipping : $ 69.00: with RollFilm Carrier : $ 89.00 (Within the 48 States)
The
MC100 Manual Wind Combination Carrier
Allows Users
to Print or Scan from MicroFiche, Jackets and 16/35mm Open Spool Roll Film
Without
Removing or Changing Carriers.
********************************************************************
The
MC-200 Motorized Combination Carrier
Allows Users to
Print or Scan from MicroFiche, Jackets and 16/35mm Open Spool Roll Film
Without
Removing or Changing Carriers.
*******************************************************************
The
MC1635 Motorized 16/35mm RollFilm Carrier
Allows easy viewing of 16/35mm
Open Spool RollFilm